Loading... Please wait...

Project Bike Yamaha M1 Build 2013

Click image for more detail Image 1
  • Image 1


Product Description

Project M1 2013

project-rossi-yamaha-m1.jpg

 

We have been approached by a customer that has asked us to help supply and plan the build of a Yamaha M1 using his supplied Yamaha R1.

Parts and work to complete.

  • Order Bodywork.
  • Order R6 Headlight
  • Service kit, K&N filters and oil.
  • Samco hose kit ( 16 part kit with clips )
  • Pc3 and Quickshifter
  • Rad Cover
  • Drop bike of with Racefit and have single exit Carbon GP exhaust built on the bike.
  • Drop bike of with Painters and have Rossi replica paint work.
  • Deliver bike to back to customer.
  • Customer to complete build with Wavys, Brembo upgrade
  • Ride the bike over to the TT 2013


PART 1

Jesters allready deal with a company in Portugal called "Lacomoto" and they make the bodywork for the R1.

They can supply all of the parts in Glass or Carbon to convert your R1 in to a true M1 replica. ( details on oue site HERE )

 

After a lot of emails to confirm the details... the order is in and the project is GO !!!!

 

Parts on order. ( Lacomoto )

Full M1 bodykit.

  • Front fairing - (with Light Holes)
  • Front fairing support (2 pieces)
  • Road lights - (UK Yamaha R6 03 05)
  • Screen
  •  Tank cover
  • Foam Seat
  • Ram Air intake Tubes - (2 pieces Carbon Fiber)
  • Belly Pan
  • Front fender
  • Front Fender Sides - (2 pieces) in (Carbon Fiber)
  • Tail fairing with road light - (Stop light only)
  • Under seat enclosure
  • Swingarm arm protection - (Carbon Fiber )
  • Rear hugger - (Carbon Fiber)
  • Exhaust Cover - (Carbon Fiber)
  • Exhaust Bracket - (2 Pieces) in (Carbon Fiber)
  • Termigonini Decal for Exhaust - (Heat resistant)
  • All Fastenings and Fixings



All of the above will be ready in around 2 / 3 weeks and is getting shipped to the uk.

The bike is due in to the workshop in 2 weeks and will then be stripped ready for the build.



Parts in stock ready for fitting.

  • Power Commander3 (with Map installed).
  • Quick Shifter + required connecting Rods.
  • Renthal Race Clips-ons inc 2x Grips.
  • Quick action Throttle inc 3x different settings
  • Motorized Registration Plate Bracket
  • Custom Registration Plate
  • Ohlins steering Damper
  • Brembo 19x18 Brake Master
  • Brembo 16RCS Clutch Master
  • Brembo 15ml Brake Reservoirs-w/ Hoses
  • 520 Superlite Sprockets & Gold race chain Kit - 16t/45t
  • 4x NGK Iridium spark Plugs
  • K&N Air & Oil Filters + Silkolene Comp 4 oil
  • Full set of Blue Samco Silicone Coolant Hoses x16 pieces + Stainless clips.
  • Titanium radiator guard + Extra sheeting for below radiator
  • Alarm
  • Front ZIP LED indicators x2
  • Rear ATOM LED mini indicators x2

The bike has now been dropped into Racefit for the pipe work to be made up, just need to get the bodywork fitted.



Part 2 

Remove factory bodywork.
Start fitting all of the abbove parts.
Fit Lacomoto bodykit
Install GP exhaust
Paint Bike



------------------------------------------------------------------
With Thanks to, so far.

The Customer: Paul
Lacomoto: Bodywork
B&C Express: K&N, PC3, Oil and filter.
Racebikebits: Samco Hose kits
R&G: Rad Cover
RaceFit: Exhaust


------------------------------------------------------------------
2006 Yamaha R1 Sp.

bike-build-r1-bike.jpg

bike-built-r1-bike-2.jpg

Lots of parts ready to go.

bike-build-stock-boxs.jpg

Parts fitted so far....


  • PC3 Fitted.
  • Lacomoto Fairing
  • Qucikshifter fitted
  • Clip on and grips Fitted.
  • Steering damper fitted
  • Master Cylinder fitted
  • Front Brembo calipers fitted
  • Front Brake fluid suplied and front brakes bled.
  • Rear caliper and mount fitted
  • Plugs Fitted
  • Battery Fitted
  • Samco hose fitted
  • Rad Guard fitted
  • Fairing cradle

640p1030123.jpg
640p1030125.jpg


640p1030126.jpg

640p1030128.jpg

640p1030132.jpg

640p1030131.jpg

640p1030134.jpg

640p1030135.jpg

640p1030137.jpg

PART 3  Now the bike is down at Wicked Coatings ( HERE ) having some Carbon Dipping and then the full paint job.


Wicked coatings Job List.

  • 2x Rear Sets
  • Generator Rotor cover
  • Pick up Rotor cover.
  • Clutch Cover inc the cable protector.
  • Front Sprocket cover. 
  • Both Wheels.
  • Rear Brake Reservoir cap
  • Paintwork
  • Full Yamaha Fiat Rep
Photos from Wiked .


Carbon Dipped Wheels and engine parts.

m1-build-photo-4-.jpg

m1-build-photo-5-.jpg

m1-build-photo-6-.jpg

m1-build-photo-9-.jpg

m1-build-photo-45-.jpg


Paint work getting done...

m1-build-photo-24-.jpg

m1-build-photo-20-.jpg

m1-build-photo-23-.jpg

And finished....

m1-build-photo-31-.jpg

m1-build-photo-29-.jpg

Note Customers own dog photos...

m1-build-photo-52-.jpg


m1-build-photo-46-.jpg

m1-build-photo-55-.jpg

 
Then Back home for the final fit and check up.

m1-build-photo-2-.jpg

  • Remove the Wheels and replace the Wheel bearings.
  • Install the New Sprockets & Chain.
  • Fit the new Chain adjuster blocks.
  • Install the New rear Disc rotor brake.
  • Install the Quick Action throttle assembly.
  • Fit the K&N Air filter.
  • Install the Alarm system.
  • Fit Front wheel Spindle Evotech Bobbins.
  • Reg Plate
  • Fit the indicators
PART 4   All done and back in time for the customer.

m1-rossi-build-3-.jpg

m1-rossi-build-1-.jpg

m1-rossi-build-19-.jpg

m1-rossi-build-20-.jpg

m1-rossi-build-6-.jpg

m1-rossi-build-12-.jpg

More photos on the Jesters Facebook page >> HERE <<





With Thanks to


Lacomoto >>> Lacomoto <<< Bodywork Factory
RaceFit.
>>> Racefit <<< GP Carbon Can
Ebikeparts
>>> ebikeparts <<<< Picking up bike and dropping off + parts
Saturn signs >>> Saturn Signs <<<< Emergency decals
Wicked Coatings >>> wicked <<<< Carbon dipping and paint



------------------------------------------------------------------
Please hit the "Like" button and share :o)
------------------------------------------------------------------






 

 


Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Currency Calculator

Add to Wish List

Click the button below to add the Project Bike Yamaha M1 Build 2013 to your wish list.

Recently Viewed